BN-EF0001 Requisition for Industrial Lighting Fixtures

Details: Last Updated: 01 October 2013

Scope

This requisition covers the supply of fluorescent lighting fixtures in accordance with the applicable specification and the data presented herein. Full documentation as required in the inquiry, order or attached document shall be supplied in the quantities and at the times specified.

________________________________________________________________________________

1. Company specifications(s)

2. Standards

3. Hazardous category Fixture, Gasgroup, Lampholder

4. Plant location

5. Site conditions

6. Minimum ambient temperature

7. Maximum ambient temperature

8. Voltage

9. Frequency

________________________________________________________________________________

10.	Item no	1	2	3	4
11.	Fluorescent lamps
12.	Quantity
13.	Hazardous category : E R N
14.	Degree of protection in accordance with DIN 40050
15.	Transparent cover required
16.	Protective wire guard required
17.	Internal aluminum reflector required or other kind of reflector material
18.	Color of tubes
19.	Power factor correction required
20.	External surface temperature fixture in degrees °C
21.	Way of mounting : G H J T
22.	Radio interference screening required
23.	Approved test certificates of an independent laboratory required
24.	Number of keys for relamping
25.	Cable diameter
26.	Number of cable glands
27.	Through wiring	phase +neutral mm²	phase +neutral mm²	phase +neutral mm²	phase +neutral mm²
28.	Material of body
29.	Tubes are part of the supply	yes/no	yes/no	yes/no	yes/no

Deviations from specification and requisition

(To be filled in by Vendor)

Approved vendor deviations from specification and requisitions

Client’s additional requirements to company’s specification and requisition

“ Vendor furnished documents ” “ E Account ”

Vendor shall furnish documents as marked (*) below

IMPORTANT : all documents shall be in english and SHALL show Company‘s order- and item number

TOGETHER WITH QUOTATION, COPIES OF :

0	DIMENSIONAL OUTLINE DRAWINGS (General Arrangement, Main Weights )
0	COMPLETED PURCHASER&lsqou;S DATA SHEETS
0	TEST CERTIFICATES
0	SCHEMATIC DIAGRAMS SHOWING ALL ELECTRIACL COMPONENTS
0	MANUFACTURER&lsqou;S LEAFLETS AND CURVES GIVING COMPLETE DETAIL OF ALL ELECTRICAL COMPONENTS
0	PRICED SPARE PARTS LIST, FOR __ YEAR(S) OPERATION
0	QUALITY MANUAL IN ACCORDANCE WITH ISO9000 SERIES OR EQUIVALENT (1 COPY ONLY)
0

IN CASE OF ORDER (cost of documents to be included in vendor‘s price)

A		1 Repro and/or Copies for approval prior to fabrication	To be submitted within (weeks):
	B	1 Repro and/or Copies for record purposes only	To be submitted within (weeks):
0	0	CERTIFIED DIMENSIONAL OUTLINE DRAWING INCL. WEIGHTS	_
0	0	COMPLETED PURCHASER‘S DATA SHEETS	_
0	0	CERTIFIED TEST CERTIFICATES	_
0	0	SCHEMATIC DIAGRAMS SHOWING ALL ELCETRICAL COMPONENTS	_
0	0	WIRING- AND/OR PRINCIPLE DIAGRAMS	_
0	0	MANUFACTURER‘S LEAFLETS AND CURVES GIVING COMPLETE DETAIL OF ALL ELECTRICAL COMPONENTS	_
0	0	ERECTION DRAWINGS AND INSTALLATION MANAUALS	_
0	0	DRAWINGS SHOWING ALL CIVIL PROVISIONS, LOADINGS, ANCHOR BOLT LOCATION ETC.	_
0	0	GENERAL ARRANGEMENT DRAWINGS	_
0	0	OPERATING/MAINTENANCE MANUALS INCLUDING PARTLIST	_
0	0	QUALITY/INSPECTION AND TEST PLAN	_
->	->	WITHNIN __ WEEKS AFTER APPROVAL 1 REPRO AND/OR __ COPIES OF CERTIFIED FINAL DRAWINGS, ETC. ARE REQUIRED	_

TEST/INSPECTION

COPIES OF OTHER DOCUMENTS (to be submitted immediately after test/inspection)

0	CERTIFIED TEST REPORTS
0	CERTIFIED PERFORMANCE CURVES
0