BN-DS-C59 90 Degree Three Weld Short Radius Miter Elbow

Details

Overall dimensions of a 90 degree three weld short radius miter elbow

 

NOM. DIA. A B C (1) D (1)   NOM. DIA. A B C (1) D (1)
MIN (3) LR.ELL. DIM. MIN (3) LR.ELL. DIM.
8” 203 203 108 149 29   76” 1746 1930 1035 1413 259
10” 254 254 137 156 37   78” 1791 1981 1062 1451 265
12” 305 305 165 222 43   80” 1835 2032 1089 1487 271
14” 356 356 191 260 48   82” 1880 2083 1116 1524 279
16” 406 406 219 297 54   84” 1924 2134 1143 1562 286
18” 457 457 244 338 62   86” 1969 2184 1172 1599 292
20” 508 508 273 371 68   88” 2013 2235 1199 1637 298
24” 610 610 327 446 82   90” 2057 2286 1226 1673 306
26” 648 660 356 483 89   92” 2099 2337 1253 1710 313
28” 692 711 381 521 95   94” 2146 2388 1280 1748 321
30” 737 762 410 557 102   96” 2188 2438 1307 1784 327
32” 781 813 435 595 110   98” 2235 2489 1334 1822 333
34” 826 864 464 632 116   100” 2273 2540 1362 1859 340
36” 870 914 489 670 122   102” 2321 2591 1387 1897 348
38” 914 965 518 706 129   104” 2362 2642 1416 1934 354
40” 959 1016 546 743 137   106” 2407 2692 1443 1972 360
42” 1003 1067 572 781 143   108” 2451 2743 1470 2008 367
44” 1048 1118 600 818 149   110” 2496 2794 1497 2045 375
46” 1092 1168 625 856 157   112” 2540 2845 1524 2083 381
48” 1137 1219 654 892 164   114” 2584 2896 1553 2119 387
50” 1181 1270 679 930 170   116” 2629 2946 1580 2156 395
52” 1226 1321 708 967 178   118” 2673 2997 1607 2194 402
54” 1264 1372 737 1003 184   120” 2718 3048 1634 2230 408
56” 1308 1422 762 1041 191   122” 2762 3099 1659 2269 416
58” 1353 1473 791 1078 197   124” 2804 3150 1685 2305 422
60” 1397 1524 816 1116 205   126” 2845 3200 1715 2343 429
62” 1441 1575 845 1152 211   128” 2889 3251 1741 2380 435
64” 1486 1626 870 1191 217   130” 2937 3302 1768 2418 443
66” 1530 1676 899 1227 225   132” 2978 3353 1797 2454 449
68” 1575 1727 927 1264 232   134” 3023 3404 1822 2491 456
70” 1619 1778 953 1302 238   136” 3067 3454 1851 2529 462
72” 1664 1829 981 1338 244   138” 3112 3505 1878 2565 470
74” 1702 1880 1008 1376 251   140” 3156 3556 1992 2602 476


NOTES:

  1. “C” AND “D” DIMENSIONS ARE APPROXIMATE. DO NOT USE FOR FABRICATION.
  2. THESE MITER ELBOW ARE TO BE USED ONLY WHEN AUTHORISED BY THE PIPING SPEC’S FOR THE JOB.
  3. USE “A” MINIMUM DIMENSION ONLY WHERE NECESSARY TO MEET CLOSE CLEARANCE REQUIREMENTS.
  4. USE BUTT-WELD “A” ONLY WHERE NECESSARY TO CONNECT TO FLANGE OF FITTING. USE MITER WELD FOR PIPE CONNECTION.
  5. MATERIAL SHALL BE AS SPECIFIED IN THE JOB PIPING MATERIALS SPECATION CLASS.
  6. WELDING SHALL BE IN ACCORDANCE WITH JOB SPECIFICATIONS C-2 OR C-5.