Table of content
1. Introduction
This requisition covers the supply of incandescent lighting fixtures in accordance with the applicable specification and the data presented herein.
Full documentation as required in the inquiry, order or attached documents shall be supplied in the quantities and at the dates specified.
2. Equipment and material description
| 1. | Hazardous category | Fixture | |
| Gasgroup | Lampholder | ||
| 2. | Plant location | ||
| 3. | Site conditions | ||
| 4. | Minimum ambient temperature (°C) | ||
| 5. | Maximum ambient temperature (°C) | ||
| 6. | Voltage (V) | ||
| 7. | Frequenty (Hz) | ||
| 8. | Item number | A B C D E F | |
| 9. | Incandescent lamps | ||
| 10. | Quantity | ||
| 11. | Output watt (W) | ||
| 12. | Hazardous category: E, R, N | ||
| 13. | Explosion protection | ||
| 14. | Degree of protection in accordance with reference 3.2.1 | ||
| 15. | Fixtures shall be user | indoor/outdoor | |
| 16. | External reflector required | yes/no | |
| 17. | Type of cable gland | explosion proof/normal industrial | |
| 18. | Test certificates of cable glands required | yes/no | |
| 19. | Coned draw gland required | yes/no | |
| 20. | Kind of material cable glands | ||
| 21. | Size of thread for cable gland holes or conduit connections | ||
| 22. | Holes shall be suitable for connection to a conduit system | yes/no | |
| 23. | Fixtures shall be provided with a seal for incoming wiring | yes/no | |
| 24. | Thread of seal | ||
| 25. | Position and number of cable glands | ||
| 26. | Diameter of cable | Under armor | |
| Over armor | |||
| Overall | |||
| 27. | Protective guard required | yes/no | |
| 28. | Approved test certificate of an independent laboratory required | yes/no | |
| 29. | Color of external surface | ||
| 30. | Material of fixture body | ||
| 31. | Bulbs are part of the supply | yes/no | |
| 32. | Special keys are to be supplied | yes/no | |
| 33. | Number of special keys | ||
3 List of applicable documents
3.1 Specifications
BN-SP-EF02 issue 1 Industrial incandenscent lighting fixtures for use in potentially explosive atmospheres
3.1 Standards, Codes and Norms
IEC 529 issue 1989 Degree of protection provided by enclosure (IP Code)
Deviations from Specification and Requisition
(To be completed by Vendor)
Approved Vendor Deviations from Specification and Requistions
Client's Additional Requirements to Company's Specification and Requisition